7

year

CTS-ChinaTransmissions

Search This Supplers Products:Industrial Roller Chain and SprocketsIndustrial sprocket manufacturerpulley suppliersroller chain attachmentsgear manufacturingtaper bush

Home Categories Store home Product list Taper Bush & HubsSplit Taper Bushing

P3 Split Taper Bushing | 1-1/8"-1-5/8" Bore | CTS

group name: Split Taper Bushing

Min Order: 1 piece

brand name: CTS-ChinaTransmissionS

model: P3 Split Taper Bushing

Nearest port for product export: Shanghai, Ningbo, Tianjing, Guangzhou

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW

Acceptable payment methods: T/T, L/C, D/P D/A, MoneyGram, PayPal, Westem Union, Cash

update time: Sat, 29 Aug 2026 06:04:15 GMT

contact supplier

Paramtents

Material Cast Iron
Color Natural
Accuracy High precision taper lock bushing
Quality Easy Installation and Maintenance
Interchangeability Directly interchangeable with other brands

Packging & Delivery

Min Order1 piece

Briefing

P3 split taper bushing: 1-1/8"-1-5/8" bore, 192 in-lbs, cast iron. Same bolt circle as P1/P2; swap without re-boring. Browning P3 compatible.

Detailed

About P3 Split Taper Lock Bushing

CTS® P3 Split Bushing

The P series taper lock bushing is built for a problem every plant engineer knows: the hub is already bored, but the load grew. P1, P2, and P3 share one large-end OD and one bolt circle, so you can move up the length scale and keep every pulley, sprocket, and hub you already own.

The P3 taper bushing is longer and better for heavier-duty needs: deeper shaft engagement spreads the load over more of the bore, which pays off on gearmotor outputs, elevator heads, and other drives where torque keeps climbing.

It is a standard size in the Browning-style system: a CTS P3 swaps directly with Browning P3 and Martin P3. Selection numbers: bore 1-1/8" to 1-5/8", torque 192 in-lbs; the technical table above holds the rest.

For a quotation or other information on Split Taper Bushing, please contact us, and we will be happy to help you.

Quality Assurance:
ISO9001: 2015 and GB/T24001-2016 / ISO14001: 2015.

P3 Split Taper Lock Bushing Technical Data

P3 Split Bushing Dimensions

L: 4-7/16

U: 13/32

T: 4-1/32

D(Large end): 1.938

D(Small end): 1.699

H: 3

W: 3/8

X: 3-13/16

Y: 7/32

R: 7/32

Bolt Circle(V): 2-7/16

Stock Bore Range(in):

Type1(Min.): 1-1/8

Type1(Max.): 1-3/8

Type2(Max.): 1-5/8

Cap Screws:

# of Screws: 3

Thread Dia.(in): 5/16

Length(in): 1

Wrench Torque(in-lbs): 192

Ave.weight(lbs): 2

Directly interchangeable with Browning P3 and Martin P3 split taper bushings (same STB profile). Not compatible with QD® or Taper-Lock® hubs — those use different taper systems. Browning® is a trademark of Emerson Electric Co.; CTS products are compatible replacements, not affiliated with Emerson.

FAQs

What is the difference between the P1, P2, and P3 split taper bushings?

Same OD, bolt circle, and screw set (three 5/16" at 192 in-lbs). They differ in length and therefore shaft engagement: P3 is the longest and suits the highest torque in the family, and P1 is the shortest.

Can I fit a P3 where a P1 was, without re-boring the hub?

Yes — the P family shares one OD and bolt circle, so the length can change without touching the hub. Check the hub's minimum bore before sizing up.