The MN coupling, also known as the Muffelex Coupling, is a type of flexible coupling used to connect two rotating shafts in machinery. It is designed to accommodate misalignment, reduce vibrations, and transmit torque between the connected shafts. The MN coupling consists of two hubs and an elastomeric element.

The MN coupling, also known as the Muffelex Coupling, is a type of flexible coupling used to connect two rotating shafts in machinery. It is designed to accommodate misalignment, reduce vibrations, and transmit torque between the connected shafts. The MN coupling consists of two hubs and an elastomeric element.

These three types of racks offer different characteristics and application capabilities, allowing them to be applied in various industries and machinery that require linear motion, precision, and power transmission

Hobbing is a common manufacturing process used to produce sprockets with accurate tooth profiles

Tapered bore v-pulleys, incorporating an appropriate tapered bush, offer a convenient, quick and easy installation

Shanghai PTC will open from 23th, October to 27th October, welcome to visit us.

Milling spiral bevel gears is a complex process that requires precision and expertise. Here are some key points to consider:

Cutting bevel gears on a milling machine involves a different approach compared to spiral bevel gears.

Cutting bevel gears on a milling machine involves a different approach compared to spiral bevel gears.

A gear rack is a type of gear on which gear teeth are cut on one face of a bar. The bar can be square, round or rectangular in cross section and the teeth can be either parallel to the base or set at an angle. They are a simple and common type of element in mechanical drive systems and are always paired with a pinion.

An idler sprocket is an essential component in many mechanical systems. Its primary function is to guide and maintain the proper tension of a chain or belt that is transmitting power.

Cutting bevel gears on a milling machine involves a different approach compared to spiral bevel gears.

Removing burrs from a sprocket is important for several reasons.

Gear laser quenching, also known as laser hardening or laser surface hardening, is a heat treatment process used to enhance the hardness and wear resistance of gear teeth. It involves using a high-energy laser beam to rapidly heat the surface of the gear teeth and then quickly cooling it off, resulting in a hardened layer on the gear surface.

The manufacture process of v-belt pulley: Material Prepation - Cast Iron - CNC Maching - Grooving - Surface Treatment -Cleaning & Packing

The manufacture process of locking assembly is : Material Preparation - CNC Maching - Bore Drilling - Benching Process - Assemble - Cleaning & Packing

QD bushings, also known as quick-disconnect bushings, are used throughout the industrial power transmission and agricultural industries for various sprocket, sheave, pulley, and synchronized drive needs.

The split tapered bushing alleviates the need to have a component bored to size, ideally lowering on hand requirements and allowing for changes in shaft size if necessary. The barrel of the split tapered bushing is split in two places and is keyed to the shaft.

Taper Bore Weld-on-Hubs are made out of steel, drilled, tapped and taper bored to receive standard Taper Bushes.

Agricultural Roller Chains are manufactured of hardened steel parts to close tolerances. They provide high quality, increased strength and longer life within their service range.