This 6016 coupling chain is manufactured using high-quality precision heat-treated components to give it the maximum strength, durability and performance that you can expect to get out of a coupling chain

Bevel gears are gears where the axes of the two shafts intersect and the tooth-bearing faces of the gears themselves are conically shaped. Bevel gears are most often mounted on shafts that are 90 degrees apart, but can be designed to work at other angles as well. The pitch surface of bevel gears is a cone.

Roller chain is a kind of chain used to transmit mechanical power.

This AK17 Pulley 5/8" bore is directly interchangeable with other manufacturers, is 1.75" in diameter, is used with A style V-Belts.

The timing pulley is an important part of the engine's air distribution system.It plays a important part in our daily life.

An idler sprocket is a device used to maintain the tension in a chain or chain drive system.

The bushing is a matching part used outside the mechanical parts to achieve the functions of sealing, wear protection, etc. It refers to the ring sleeve that functions as a gasket.

There are two types of links alternating in the bush roller chain. Inner links and outer links.

Gear coupling is composed of internal gear ring with the same number of teeth and flange half coupling with external teeth.

Hobbing is a machining process for gear cutting, cutting splines, and cutting sprockets on a hobbing machine, which is a special type of milling machine.

Precautions for chain use and storage

Contemporary CNC machines are fully automated. All they need is digital files with the instructions about cutting trajectories and tooling.

Things to considerate when buying timing pulley

A pulley is simply a collection of one or more wheels over which you loop a rope to make it easier to lift things.

Introduction of sprocket

A coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power.

The size of the sprocket determines the structure of the sprocket

The sprocket has a short service life, which is far from meeting the requirements of production practice. According to the use status, processing status and manufacturing technology of the sprocket, some improvement measures are proposed for the sprocket:

Spur gear is one which has teeth profile cut parallel to the axis of the gear as shown above. It is used for transfer of power in parallel shafts.

Production Process of Sprocket

The process of gear shaping.

The various materials used for gears include a wide variety of cast irons, non ferrous material and non – metallic materials.

A timing belt pulley is a specialized pulley system with teeth or pockets along the outside of the pulley body's diameter.

The introction of kc coupling

Split-Taper bushed bore sprockets and split taper bushings secure drive shafts to a base or housing.

The roller chain is mainly composed of five parts: inner chain plate, outer chain plate, pin shaft, sleeve and roller.

To specify a roller chain, you need three basic dimensions:
The chain pitch … the roller diameter … and the width between inner link plates.

The introduction of bellows coupling

HRC Couplings have a relatively high load carrying capacity and can dampen moderate shock loads and vibration.

The structure of the transmission chain is composed of inner chain links and outer chain links. It is composed of five small parts: inner chain plate, outer chain plate, pin, sleeve and roller. The quality of the chain depends on the pin and sleeve.

A jaw coupling is a type of general purpose power transmission coupling that also can be used in motion control (servo) applications.

The roller chain coupling consists of two shafts, a chain, a cover, and a general sprocket

In this blog, we will discuss the different types of industrial chain sprockets.

The FCL type elastic coupling conforms to the Japanese national standard JISB1452. The FCL type elastic sleeve pin coupling uses a pin with an elastic sleeve (rubber material) at one end and is installed in the flange holes of the two coupling halves to achieve two The coupling of the half coupling.

A pulley consists of a rope and a hub or "drum" in which there is a grooved wheel mounted with an axle.

Both a chain drive and a belt drive are part of mechanisms that allow locomotion and a transfer of power within a particular piece of machinery.

The bushing is a matching part used outside the mechanical parts to achieve the functions of sealing, wear protection,

Coupling refers to a device that connects two shafts or a shaft and a rotating part, and rotates together in the process of transmitting movement and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from being subjected to excessive loads and play a role in overload protection.The following will introduce six different couplings

DOUBLE PLUS Chain is a new type that meets low noise requirements and high safety standards.

Gear is a mechanical part with teeth on the rim that can continuously mesh and transmit motion and power. Gears rely on the meshing of teeth to transmit torque. The gear is transmitted with other toothed mechanical parts (such as another gear, rack, worm).